CC 45° Indexable Chamfer and Deburring Mill
€51.05
- 45° approach angle produces even chamfers on outside edges and bores
- Chamfer width is controlled solely by axial depth of cut
- Cuts with the side edge of the CC insert rather than the corner
- Reuse CCMT and CCGT inserts with worn corners
- Removes burrs and sharp edges in one pass
- Parallel shank for direct clamping in common tool holders
- 42CrMo body for a rigid and stable cut
- Insert replacement instead of regrinding keeps chamfer geometry consistent
Discount scale
Buy more, save smart!
3%
from shopping cart value of 300 €
5%
from shopping cart value of 600 €
8%
from shopping cart value of 1,000 €
10%
from shopping cart value of 1,500 €
15%
from shopping cart value of 2,000 €
CC 45° Indexable Chamfer and Deburring Mill
The CC 45° chamfer mill produces clean, evenly chamfered edges. This parallel-shank indexable chamfer mill uses CC inserts such as CCMT and CCGT. It chamfers outside edges, contours and bore edges while removing burrs and sharp edges before the component leaves the machine.
The insert is positioned at 45° in the cutter head and cuts with its side edge. This produces a constant chamfer angle, while chamfer width is controlled solely by axial depth of cut, without changing tools for different chamfer sizes. Because the insert corner is not engaged, CC inserts with a worn corner, for example from turning, can be reused here. This reduces insert consumption and makes full use of the cutting material. The 42CrMo body provides the rigidity needed for a stable cut. When worn, only the insert is changed; regrinding or replacing a solid carbide chamfer mill is unnecessary, and the chamfer geometry remains consistent throughout the batch.
For chamfering and deburring on CNC milling machines, the CC 45° chamfer mill is an economical solution, particularly where CC indexable inserts are already in use.
| Application: | Chamfer Milling, Deburring |
|---|---|
| Cutter Type: | Chamfer Mills, Deburring End Mills |
| Material: | High-Strength Quenched and Tempered Steel (Quenched and Tempered) |
| Shank Shape: | Cylinder Shank without Clamping Surface |
| Suitable for Inserts: | CC..09T3.., CC..0602.., CC..1204.. |
| Surface: | Nickel Plated |
| Teeth: | 1 |
Pflichtangaben gemäß GPSR Produktsicherheitsverordnung:
TILL TOOLS GmbH
Am Kebigsgraben 19
97616 Salz
Deutschland
E-Mail: info@tilltools.de
Login
Passende Schneidplatten
Content: 10 Piece (€9.19 / 1 Piece)
Content: 10 Piece (€4.19 / 1 Piece)
Content: 10 Piece (€3.99 / 1 Piece)
Content: 10 Piece (€5.49 / 1 Piece)
Content: 10 Piece (€5.49 / 1 Piece)
Content: 10 Piece (€5.49 / 1 Piece)
Content: 10 Piece (€5.49 / 1 Piece)
Content: 10 Piece (€4.39 / 1 Piece)