Solid Carbide T-Slot Cutter ALU, T-Slot Milling Cutter, Solid Carbide Slotting Cutter
€18.92
Available, delivery time: 1-3 days
- Uncoated solid carbide with a sharp cutting edge for T-slots in non-ferrous metals
- Polished flutes and large chip spaces evacuate aluminium chips reliably
- Uncoated edges reduce adhesion and built-up edge in aluminium and copper
- Positive rake angle and sharp edges reduce cutting pressure on thin-walled components
- One tool optimised for aluminium, bronze, copper and brass
- Small protective chamfer guards against corner chipping at full engagement
- Low-vibration cutting keeps slot walls and floors free of chatter marks
- Smooth running stabilises engagement in vibration-prone workpieces
- Clean cuts reduce burr formation and rework at slot edges
Discount scale
Buy more, save smart!
3%
from shopping cart value of 300 €
5%
from shopping cart value of 600 €
8%
from shopping cart value of 1,000 €
10%
from shopping cart value of 1,500 €
15%
from shopping cart value of 2,000 €
Solid Carbide T-Slot Cutter ALU, T-Slot Milling Cutter, Solid Carbide Slotting Cutter
Aluminium, copper and their alloys tend to adhere to the cutting edge during slot milling. The ALU-series solid carbide T-slot cutter is designed for these conditions. This uncoated solid carbide T-slot milling cutter and slotting cutter produces T-slots, undercuts and side slots in aluminium, bronze, copper and brass.
Without a coating, the cutting edge retains its as-ground sharpness. Combined with a positive rake angle, it cuts smoothly with low cutting pressure. Polished flutes and large chip spaces evacuate chips from the almost fully enclosed slot before they can adhere and cause built-up edge, smeared slot walls or chip packing. A small protective chamfer reinforces the sharp geometry at the cutting corners, where the load is highest. Smooth, low-vibration cutting is particularly helpful on thin-walled housings and profiles that are themselves prone to vibration.
Where most slotting involves non-ferrous metals, the ALU-series solid carbide T-slot cutter produces clean slot walls with little rework.
| Application: | Slot Milling, Slot Milling |
|---|---|
| Application Area (ISO): | N = Non-ferrous Metals |
| Carbide Grade: | K30-K40 |
| Carbide Grain Size: | Fine grain |
| Coating: | Uncoated |
| Cutter Type: | T-Slot Milling Cutters |
| Internal Cooling: | Without Internal Cooling |
| Material: | Solid Carbide |
| Series: | ALU |
| Shank Shape: | Cylinder Shank without Clamping Surface |
| Suitable up to Material Hardness: | < 50 HRC |
| Teeth: | 4, 6 |
Pflichtangaben gemäß GPSR Produktsicherheitsverordnung:
TILL TOOLS GmbH
Am Kebigsgraben 19
97616 Salz
Deutschland
E-Mail: info@tilltools.de
Login