SMC Side-and-Face Milling Cutter, Slitting Cutter
€84.90
Available, delivery time: 1-3 days
- 90° indexable milling cutter in disc form for grooving, slotting, side and face milling
- compatible with four-edged MPHT indexable inserts for high economy per insert
- cross-tooth arrangement with alternately offset edges for smooth running and clean groove flanks
- precisely milled insert seats for a reproducible flat seat and low concentricity error
- screw clamping of the inserts for secure force transmission at high feed
- quenched and tempered CrMo alloy steel as a body for stable tool life under radial load
- generous chip flutes between the cutting edges for free chip evacuation from the groove
- standard bore with drive slot for broad mount compatibility on common arbors
Discount scale
Buy more, save smart!
3%
from shopping cart value of 300 €
5%
from shopping cart value of 600 €
8%
from shopping cart value of 1,000 €
10%
from shopping cart value of 1,500 €
15%
from shopping cart value of 2,000 €
SMC Side-and-Face Milling Cutter, Slitting Cutter
The SMC side-and-face milling cutter is a 90° indexable milling cutter in disc form for grooving, slotting, side and face milling with four-edged MPHT indexable inserts. The design is suited to machining where a defined cutting width, clean side faces and, depending on the application, also face machining are required – from single grooves through parting operations to the 90° shoulder on CNC milling machines and machining centres. The combination of a stable carrier body and multiply indexable inserts significantly lowers the tool cost per cutting edge compared with solid carbide side-and-face cutters.
In terms of design, the side-and-face cutter relies on a cross-tooth arrangement with alternately offset cutting edges. This arrangement distributes the engagement alternately across both groove flanks, keeps the cutting forces per edge low and supports smooth, low-vibration running at full immersion depth. The MPHT insert provides four usable cutting edges per insert, thus reducing the unit cost in series production. The insert seats are precisely milled and firmly screwed via clamping screws, ensuring a repeatable flat seat after every insert change. The body of quenched and tempered CrMo alloy steel supports the insert seats under radial load and brings the rigidity and impact toughness needed for high machining volumes. Clean concentricity and true running form the basis for uniform cutting engagement and reproducible machining results. Enlarged chip flutes between the cutting edges give the chips a free path out of the groove, thus reducing the risk of chip jamming and edge breakage.
The SMC side-and-face milling cutter is recommended wherever an economical indexable-insert tool is required for grooving, parting, side and face milling operations and the tool cost per cutting edge is to be reduced in a targeted manner.
Scope of delivery: side-and-face milling cutter (excluding indexable inserts) including screws and key.
| Application: | Cut-Off Milling, Face Milling, Slot Milling |
|---|---|
| Cutter Type: | Side and Face Milling Cutters |
| Hardness: | 42-45 HRC |
| Internal Cooling: | Without Internal Cooling |
| Material: | High-Strength Quenched and Tempered Steel (Quenched and Tempered) |
| Surface: | Environmentally Friendly Vacuum Coated |
Pflichtangaben gemäß GPSR Produktsicherheitsverordnung:
TILL TOOLS GmbH
Am Kebigsgraben 19
97616 Salz
Deutschland
E-Mail: info@tilltools.de
Login